Вячеслав Беловол
2017-01-06 11:52:56 UTC
Hi, I do not speak English, so I will be brief
OS: Window 10 x64
Version apcupsd: 3.14.14
DEVICE: Back-UPS ES 525 USB Cable
apctray is work!
apctest calibration(10) not work!
=================================
*apctest 3.14.14 (31 May 2016) mingw*
*Checking configuration ...*
*sharenet.type = Network & ShareUPS Disabled*
*cable.type = USB Cable*
*mode.type = USB UPS Driver*
*Setting up the port ...*
*Doing prep_device() ...*
*You are using a USB cable type, so I'm entering USB test mode*
*Hello, this is the apcupsd Cable Test program.*
*This part of apctest is for testing USB UPSes.*
*Getting UPS capabilities...SUCCESS*
*Please select the function you want to perform.*
*1) Test kill UPS power*
*2) Perform self-test*
*3) Read last self-test result*
*4) View/Change battery date*
*5) View manufacturing date*
*6) View/Change alarm behavior*
*7) View/Change sensitivity*
*8) View/Change low transfer voltage*
*9) View/Change high transfer voltage*
*10) Perform battery calibration*
*11) Test alarm*
*12) View/Change self-test interval*
* Q) Quit*
*Select function number: 10*
*This test instructs the UPS to perform a battery calibration*
*operation and reports the result when the process completes.*
*The battery level must be at 100% and the load must be at least*
*10% to begin this test.*
*Failed to read current battery level*
*============================================*
*where can I find a problem ?Thank you.*
OS: Window 10 x64
Version apcupsd: 3.14.14
DEVICE: Back-UPS ES 525 USB Cable
apctray is work!
apctest calibration(10) not work!
=================================
*apctest 3.14.14 (31 May 2016) mingw*
*Checking configuration ...*
*sharenet.type = Network & ShareUPS Disabled*
*cable.type = USB Cable*
*mode.type = USB UPS Driver*
*Setting up the port ...*
*Doing prep_device() ...*
*You are using a USB cable type, so I'm entering USB test mode*
*Hello, this is the apcupsd Cable Test program.*
*This part of apctest is for testing USB UPSes.*
*Getting UPS capabilities...SUCCESS*
*Please select the function you want to perform.*
*1) Test kill UPS power*
*2) Perform self-test*
*3) Read last self-test result*
*4) View/Change battery date*
*5) View manufacturing date*
*6) View/Change alarm behavior*
*7) View/Change sensitivity*
*8) View/Change low transfer voltage*
*9) View/Change high transfer voltage*
*10) Perform battery calibration*
*11) Test alarm*
*12) View/Change self-test interval*
* Q) Quit*
*Select function number: 10*
*This test instructs the UPS to perform a battery calibration*
*operation and reports the result when the process completes.*
*The battery level must be at 100% and the load must be at least*
*10% to begin this test.*
*Failed to read current battery level*
*============================================*
*where can I find a problem ?Thank you.*