[Apcupsd-users] apcupsd with snmp driver show DWAKE in wrong units

[Павел Мотырев]

Hello,

apcaccess show DWAKE value in timeticks, instead of seconds:
# apcaccess | grep DWAKE
DWAKE : 6000 Seconds
Correct value is 100 times lower - 60 seconds.

Issue was observed on:

OS: Ubuntu 16.10
Apcupsd version: 3.14.14 (31 May 2016)
UPS: Smart-UPS 2200
SNMP module:
MN:AP9619 HR:A10 MD:11/02/2005
AOS: 3.7.3 (02/02/2010), StatApp(name: sumx): 3.7.2 (02/02/2010)

[Stan]

Hi

See: https://bugs.launchpad.net/ubuntu/+source/apcupsd/+bug/1634572
This has been a big problem for many Ubuntu 16.04 users
Not sure if its the exact same problem, because the bug is related to
USB UPS's as far as i know. But i know that it does not send Killpower
to UPS.

Express your concern there as well so that the Ubuntu developers may fix
the issue.

Regards,
Stan

Post by Павел Мотырев
Hello,
# apcaccess | grep DWAKE
DWAKE : 6000 Seconds
Correct value is 100 times lower - 60 seconds.
OS: Ubuntu 16.10
Apcupsd version: 3.14.14 (31 May 2016)
UPS: Smart-UPS 2200
MN:AP9619 HR:A10 MD:11/02/2005
AOS: 3.7.3 (02/02/2010), StatApp(name: sumx): 3.7.2 (02/02/2010)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Apcupsd-users mailing list
https://lists.sourceforge.net/lists/listinfo/apcupsd-users